NPACK

Olivenolie servormotor drevet fire hoveder stempelfyldning ROPP metalkapper lukker dobbelt sider mærkning maskiner firkantede flasker fyldelinie fuldautomatisk

Hjem »  Produkter »  Påfyldningslinie »  Olivenolie servormotor drevet fire hoveder stempelfyldning ROPP metalkapper lukker dobbelt sider mærkning maskiner firkantede flasker fyldelinie fuldautomatisk

Olivenolieservormotor drevet med fire hoveder stempel

Beskrivelse


The line specially designed for our russian customer who sent to us the glass bottles (thin&tall) is suitable for food packing industry like olive oil/wine bottles fill-cap-label process.

Olivenolieservormotor drevet med fire hoveder stempel

Olivenolieservormotor drevet med fire hoveder stempel

Samples offered by our EU customer

The whole line including filling capping labeling machine

Olivenolieservormotor drevet med fire hoveder stempel

1.model NPACK-5030 piston filling machine
2.model NPACK-AC40 ROPP capping machine
3.model NPACK-650A double sided labeling machine
4.Nitrogen gas flushing function after filling
5.Accumulation turntable for collecting final product

As below there is the basic description &introduction one by one :

►Model NPACK-5030 four heads piston filling machine

Olivenolieservormotor drevet med fire hoveder stempel

4heads olivenpåfyldningsmaskine, kontrolleret af mikrodatamaskinen, kombinerer fotoelektricitet med pneumatisk betjening,

thus widely is applied for the liquid filling of the agriculture chemical、solution、liquid detergent、cosmetic as well as olive.The filling volume is precise,foamless and stable.

The machine can fill the liquid with the range from 25-1000ml,meanwhile there is no special requirement on the shapes of bottles.That is to say,it can fill the liquid for the normal bottles as well as the irregular-shaped bottles.

Olivenolieservormotor drevet med fire hoveder stempel

Model       NPACK-5030

Filling range     50~3000ml

Filling speed        <20-30b/m(for 500-1000ml liquid)

Nøjagtighed ± 1%

Strøm / leveringstrøm 0,8kw 、 220v

Arbejdstryk 5 ~ 6 kg / cm3

Air consumption   0.5-0.7mpa

NW 500 kg

Outer dimension      2000×800×1900mm

Mark:The filling nozzles can be designed and manufactured according to requirements from customers on the filling range and filling speed

Olivenolieservormotor drevet med fire hoveder stempel

Filling speed adjustment

Filling speed adjustment has the following 6 factors:

1, the speed of the product is determined by the viscosity of the product and the length of the suction pipe.

2, filling speed depends on the diameter of the filling head, the diameter is large, the speed is quick.

3, the product of the bubble level. The product filling speed of the high bubble should be slowed down.

4, how much is the filling quantity.

5, the accuracy of the filling quantity, adjust the filling time of each cast.

6, adjust the filling speed (that is, the speed of the servo motor).

General trouble shooting and processing

Olivenolieservormotor drevet med fire hoveder stempel

1)Touch screen is not shown, but the indicator light

Fault cause:

Check whether the fuse is burning, or the contact is bad, replace or reinstall the fuse.

2)The output indicator of the programmable controller has an output indicator, but the solenoid valve does not work.

Fault cause:

Upon examination of the solenoid valve failure, is the key to the programmable controller in the electrical damage, can replace the same type of intermediate relay, fault can be ruled out (this fault is very rare).
3)The main head there is a leak in the shutdown.

Fault cause:

The filling head cylinder does not move up and down, replaced PTFE head, check on the stingy joints have gas, or replace the filling valve, can be ruled out

4)After filling in a number of bottles do not fill

Fault cause:

♦Check whether the bottle counting electric eye, if not counting adjustable electric distance, so that it can reach the count;

♦ Check that the liquid level indicator is black, if it is white, and the liquid level is fluid, and can be filled with black

♦ Check the magnetic switch cylinder after the dive, the light is bright, if not bright, adjust to the light.

♦Check the back of the servo motor is close to the switch is bright, if not bright, adjust to the light.

5)Individual valve or cylinder action to slow down or do not work.

Fault cause:

♦The general situation is caused by the fault of the control valve, first check to control the output of the output of the display lamp (in the lower left of the programmable controller) work is normal, confirm the normal operation of the following check.

♦Magnet coil plug for transposition of the solenoid valve, if change the position of the fault, indicating that the electromagnet coil is damaged, replace the coil after failure can be ruled out.

If the valve group of the emptying port does not stop to have a lot of gas, the system has a more serious leakage. Can check the internal sealing condition, if damaged, should be replaced. If the fault can not be ruled out, can check the valve spool movement, see if there is a card phenomenon or the seal is damaged, and repair, if damaged more serious, it should be replaced by the entire valve.

6)Servo motor alarm.

Fault cause:

♦Check whether the PLC on the F**, if it is to turn off the power, and then open up to manual operation, a number of seconds after the manual injection, and then press the manual back to zero.

►Nitrogen gas flushing system

Olivenolieservormotor drevet med fire hoveder stempel

Olivenolieservormotor drevet med fire hoveder stempel

Olivenolieservormotor drevet med fire hoveder stempel

NPACK-AC40 Automatic ROPP capping machine for olive bottle with metal caps with protective chamber

Olivenolieservormotor drevet med fire hoveder stempel

automatisk ROPP-afkortningsmaskine med knapstyringssystem

Olivenolieservormotor drevet med fire hoveder stempel

Afdækningshoder til ROPP-capper

Afdækningsmaskinen er et egnet udstyr til rullepresning og forsegling af aluminiumshætterne til plastflasken 、 kæledyrsflaske glass såvel som en glasflaske. Det forudsætter skruepressehætten til flasken under rullepressen fra kogeplader, automatisk tilførselsflaske 、 Hætter, der fjerner baghætterne. Den afdækkede flaske favoriserer egenskaberne som den stabile afdækningseffekt, praktisk afdækning, så den fungerer som indblanding og tyverisikring

Olivenolieservormotor drevet med fire hoveder stempel

Model NPACK-AC40

Forsyningspulver (V / Hz) AC 220/50 380/60

Kapacitet (m / min) ≧ 4000B / M

Hætte størrelse (mm) 250-1000

Anvendelse Alum-hætter

Luftudstødning fra Vacuum pum (m3 / h) 5 kg

Udvendig dimension (L × B × H) (mm) 2000 × 1000 × 2300

NG (kg) 520

Tegning af ROPP-capping-arbejdsproces (med eksempel som automatisk linje med transportørplatform)

Olivenolieservormotor drevet med fire hoveder stempel

How to operate model NPACK-C25 Single head ROPP capping machine

Olivenolieservormotor drevet med fire hoveder stempel

Fødebeholderen, der bevæger sig på transportbåndet, føres ind i et indfødningsstjernehjul gennem indfødningsorm, stjernehjul, der bringer beholderen under tætningshovedet i den efterfølgende indekseringsdel, hvilket betyder, mens flasken afhenter en hætte fra afleveringsrøret med hættepåfyldning skål, hvor beholderens krop og hals er placeret under det roterende hoved, hvor tætningshovedet udfører perfekt betjening af gevind og tætning.

Fremtrædende funktioner:

Olivenolieservormotor drevet med fire hoveder stempel

Enheden er lavet kompakt og alsidig.
SS lameltransportør
SS Elegant Matt færdig krop
Indbygget i kontrolpanelet foran
Vibratorskål
Med AC frekvensomformer

►model NPACK-650A double sided labeling machine

Olivenolieservormotor drevet med fire hoveder stempel

The labeling equipment is for the round bottle labeling in the industry like food、oil、pharma、wine、cosmetics and so on.

The machine with elegant design can be easily operated and maintained by the common worker,

who requires no special training in operation this machine.Just give a simple adjustment to produce another product when you want to swap the different kinds bottle labeling.

Olivenolieservormotor drevet med fire hoveder stempel

Metal caps capping+labeling line

The bottle labeler is thus out from as below-mentioned characteristics:

1: Hoveddelen af udstyr er lavet af SUS304 og avancerede aluminiumsprodukter.

2:The labeling heads is driven by the stepping motor that is imported from Japan.

3: Alt lyssensorudstyr importeres fra både Japan og Tyskland

4: PLC Styret af menneske-maskingrænsefladen med 60 hukommelsesenheder

5: Maskinen er det bedste valg til brug af en enkelt arbejdstager.

6: Maskinen har funktionen som opretstående flaske, flaskefordeling 、 mærkning 、 fladning såvel som tælling.

7: Positionen 、 højde 、 mærkningsvinklen kan let justeres.

8: Udstyret med transportbåndet påføres maskinen til sæt af produktionslinjen.

Basic parameter of double sides labeling machine

Olivenolieservormotor drevet med fire hoveder stempel

Spænding220V, 50HZ
Strøm2KW
Labeling Speed20-120bottles/min, 150-200bottle/min
Labeling Accuracy± 1 mm
Printer to use air5 kg/cm2
Object Size30-200 mm(H),30-100 mm(W)
Label Size25-300 mm(L),20-180 mm(W)
Roll Size76 mm(Inside),380 mm(Outside)
Dimension3048(L)×1500(W)×1600(H) mm

Olivenolieservormotor drevet med fire hoveder stempel

turntable for accumulation of final product

Olivenolieservormotor drevet med fire hoveder stempel